Sportage 2WD 4Dr L4-2.0L (2000)
The Power Distribution schematic shows the wiring from the Battery and Generator to the Starter Solenoid, Fuse Box, Ignition Switch and Light Switch.
The first component after a fuse is also shown.
The Power Distribution schematic refers to Fuse Box Details and Light Switch Details schematics. By using these three (3) schematics, power
distribution wiring can be followed from the Battery and Generator to the first component after a Maxi Fuse, Fuse and Light Switch. The ability to follow
the power distribution wiring to the first component in each circuit is extremely helpful in locating short circuits which cause fuses to open.
The fuses in the sample schematic below are "Hot At All Times," since Battery voltage is always applied to them.
Thin Insulation Wire
To reduce the weight of the wiring harnesses, a thin coating of a high resistance insulation material is used.
Shielded Braid Wire
