Sportage 2WD 4Dr L4-2.0L (2000)
Center Mounted Brake Lamp Bulb: Service and Repair
4 Door
High-Mounted Brake Light Assembly Bulb (4 DOOR)
CAUTION: When a removing or installing any electrical units, wiring or electrical connectors, disconnect the negative battery cable to prevent
possible short circuits which could lead to personal injury and/or property damage.
1. Disconnect negative battery cable.
2. Open rear door.
3. Remove two fasteners that attach cover; remove cover.
4. Remove bulb from socket.
5. Install replacement bulb in socket.
6. Install cover with two fasteners.
7. Connect the negative battery cable.
