Sportage 2WD 4Dr L4-2.0L (2000)
1. Align the timing belt pulley and the pump body alignment marks.
2. Align the mating marks on the camshaft pulleys with the alignment marks on the seal plate.
NOTICE:
-
For intake side camshaft pulley, align I mark.
-
For exhaust side camshaft pulley, align E mark.
3. Install the timing belt so that there is no looseness at the tension side, and at the two camshaft pulleys.
CAUTION:
-
If the timing belt is being reused, it must be reinstalled to rotate in the original direction.
-
Check that there is no oil, grease, or dirt on the timing belt
4. Loosen the tensioner lock bolt.