Sportage 2WD 4Dr L4-2.0L (2000)
4. Remove one anchor bolt.
5. Remove the B-pillar lower trim panel.
6. Remove belt guide.
7. Remove one bolt and one sheet metal screw to remove the retractor assembly.
Installation
1. Install one bolt and one sheet metal screw to attach the retractor assembly.
Tighten the mounting bolt to 54 lb-ft (73 N.m).
WARNING: EXERCISE CARE TO INSTALL THE BELT SO THERE ARE NO TWISTS IN IT. A TWISTED BELT MAY BE
HARMFUL TO A PASSENGER IN A SERIOUS ACCIDENT. A TWISTED BELT ALTERS THE DISTRIBUTION OF FORCE
RESULTING FROM SUDDEN DECELERATION.
2. Install two screws in belt guide.
3. Install B-pillar trim panel.
4. Install the anchor bolt.
Tighten the anchor bolt to 54 lb-ft (73 N.m).
5. Install the anchor bolt cover.
6. Install one bolt through the lap belt mounting bracket.
Tighten the bolt to 54 lb-ft (73 N.m).
7. Install the bolt cover.