Sportage 2WD 4Dr L4-2.0L (2000)
2. Raise the Hood Switch out of the radiator support, then disconnect the Hood Switch Connector from the vehicle harness connector, and remove
the switch.
Installation
1. Route the Hood Switch Connector through the hole in the radiator support, then connect the Hood Switch harness connector to the vehicle harness
connector.
2. Position the Hood Switch in the radiator support, then reinstall the Hood Switch screw.
NOTE: Do not over-tighten the Hood Switch screw
3. Reposition the Hood Switch rubber boot ensuring that the rubber boot covers the Hood Switch mounting plate.
