Sportage 2WD 4Dr L4-2.0L (2000)
Neutral Safety Switch: Testing and Inspection
TRANSMISSION RANGE SWITCH
Inspection (Operation)
1. Verify that the starter operates with the ignition switch in the START position and the selector lever in P and N ranges only.
2. Verify that the back-up lights illuminate when shifted to R range with the ignition switch in the ON position.
3. Inspect the transmission range switch as follows if it does not operate as specified.
Inspection (Continuity)
1. Disconnect the transmission range switch connector.
Fig. 4 Transmission Range Switch Terminal Continuity
