Sportage 2WD 4Dr L4-2.0L (2000)
NOTICE: Insure all the lower valve body holes line up with their corresponding holes in the separator plate and lower valve body gasket.
2. Place a new upper valve body gasket on the lower valve body assembly, insuring all holes align.
3. While holding upper valve body gasket and lower valve body assembly together, install it onto the rear upper valve body assembly.
4. Install the three bolts indicated. After aligning all the lower valve body holes with their corresponding holes in the separator plate and two gaskets,
temporarily tighten the three bolts.
NOTICE:
-
Tighten the bolts enough to insure that none of these components will shift when the assembly is moved.
-
Do not over tighten the bolts. The bolts will be torqued to specification at the appropriate time.
-
Be careful not to damage the gasket
