Sportage 2WD 4Dr L4-2.0L (2000)
7. Inspect universal joints for smooth pivoting. If joints bind or appear tight, replace them as assemblies.
UNIVERSAL JOINT
Disassembly
NOTICE: To prevent drive damage, use vise pads.
1. Place driveshaft in vise.
2. For re-assembly purposes, place index marks (reference marks) on the driveshaft, spider and yoke.
3. Using a screwdriver or drift punch, remove and discard all snap rings.
4. Lightly tap with a suitable hammer to remove bearings from the yoke.
