Sportage 2WD 4Dr L4-2.0L (2000)
8. Apply sealant to the door where it was sealed before. Use Essex U400 HV urethane.
9. Clean the inside of the glass with a commercial glass cleaner and a lint-free cloth
10. Install molding on the glass.
11. Install the glass into the body.
12. Press the glass firmly into the urethane sealant.
13. Press the molding firmly into place.
14. Remove excess sealant, if any.
15. Tape the window firmly into place so it will not creep down from its own weight.
16. Perform water leak test immediately.
17. Clean the outside of the glass with a commercial glass cleaner and a lint-free cloth.
18. Remove the tape from the windshield wiper and lower it onto the glass.
19. Connect the rear window defroster connectors.