Sportage 2WD 4Dr L4-2.0L (2000)
NOTE: The following cure times may be critical. Attempting to replace a windshield in ambient temperature over 95 °F (35 °C) should be
avoided because the surface of the sealant may harden before completing the application.
8. Apply the urethane bead to the body just outside the date. The bead should be slightly higher than the dam. The urethane should be Essex
U4OOHV or equivalent.
9. Install molding on the glass.
10. Install the glass into the body making sure the glass rests upon the two spacers at the bottom of the windshield.
11. Press glass firmly into place.