Sportage 4WD L4-2.0L (2005)
4. Move the nozzle tip when spraying the cavity wax facing the outbound panel as indicated in photo (E).
5.
Spray cavity wax sufficiently to the end of the outbound panel (F) while moving the nozzle tip right and left.
Repeat the above step (4) on the opposite side.
Spraying Cavity Wax onto the inside of Rear Floor Cross Member
6. Locate hole (G); then insert the nozzle tip to apply cavity wax.
Spray cavity wax onto the inside of the left side of the rear floor cross member according to the procedure below.
