Sportage 4WD L4-2.0L (2005)
1. Check the electrode gap(A).
Standard (New)
1.0 - 1.1 mm (0.039 - 0.043 in.)
2. Carefully remove the spark plug cable by pulling on the rubber boots(A).
Check the condition of the spark plug cable terminals(B), if any terminal is corroded, clean it, and if it broken or distorted, replace the spark plug
cable.
3. Connect the ohmmeter probes and measure resistance.
RESISTANCE : 5.6 KOhm/m ± 20%
4. Resistance should not be higher than 10 KOhm per meter of cable. If resistance is higher, replace the cable.
