Sportage 4WD L4-20L (2005) Water Pump Component Specifications
1) Install the water pump (B) and a new gasket with the 3 bolts (C).
2) Install the alternator brace (A) with the 2 bolts (D).
Tightening torque: 19.6 - 26.5 Nm (2.0 - 2.7 kgf.m, 14.5 - 19.5 ft. lbs.)
2. Install the power steering pump bracket (A) and bolts (B, C).
3. Install the alternator.
4. Install the power steering pump.
5. Install the timing belt idler.
6. Install the timing belt.
7. Install the water pump pulley.
8. Install the drive belts.
9. Tighten the water pump pulley bolts.
Tightening torque: 7.8 - 9.8 Nm (0.8 - 1.0 kgf.m, 5.8 - 7.2 ft. lbs.)
10. Fill with engine coolant.
11. Start engine and check for leaks.
12. Recheck engine coolant level.
THERMOSTAT
1. Place the thermostat in thermostat housing.
1) Install the thermostat (B) with the jiggle valve up ward.
2) Install a new gasket (A) to the thermostat (B).
