Sportage 4WD L4-2.0L (2005)
Receiver Dryer: Service and Repair
REPLACEMENT
1. Remove the condenser, and then remove the receiver/drier after loosening the nuts (B) at the lower receiver/drier (A).
2. Install in the reverse order of removal, and note these items :
-
If you're installing a new receiver/drier, add refrigerant oil ND-OIL8.
-
Replace the O-rings with new ones at each fitting, and apply a thin coat of refrigerant oil before installing them. Be sure to use the right
O-rings for R-134a to avoid leakage.
-
Be careful not to damage the radiator and condenser fins when installing the condenser.
-
Be sure to install the lower mount cushions of condenser securely into the holes.
-
Charge the system, and test its performance.
