Sportage 4WD L4-2.0L (2005)
2. Check if the OCV operates normally by providing 12V power supply as shown. Do not apply voltage for longer than 5 seconds at a time; Do not
overheat OCV windings.
Notice
Careful attention is necessary to avoid short circuit when providing the OCV with 12V power because the spacing between the OCV power and ground
terminals is very narrow.
3. When 12V power is provided to the OCV, the OCV must move forward as shown in the right picture.
A: Maximum retarded valve timing condition (12V not provided) Normally Open
B: Maximum advanced valve timing condition (12V provided) Closed when energized.
