Sportage 4WD L4-2.0L (2005)
4.
For SPECTRA (LD) TCM reprogramming, select option "01. LD 2.0 TCU REVERSE INCORRECT [AUTO]" and press ENTER.
For SPORTAGE (KM) TCM Reprogramming, select option "01. KM 2.0 TCU REVERSE INCORRECT [AUTO]" and press ENTER.
5.
Enter "0525 as the password for automatic reprogramming mode and press "ENTER". The Hi-Scan Pro will establish communication, check the
TCM ID and reprogram the TCM. Turn the ignition key OFF and ON in accordance with the directions displayed on the Hi-Scan Pro screen.
Notes:
^
The Hi-Scan Pro detects the current TCM ID, assigns the new TCM ID and displays them on the Hi-Scan Pro screen.
^
Check the TCM ID displayed on the Hi-Scan Pro screen to verify that the correct TCM software is being downloaded.
Refer to the ROM ID INFORMATION TABLE.
^
If the Hi-Scan Pro does not download the program, use the MANUAL REPROGRAMMING PROCEDURE.
6.
When the REPROGRAMMING COMPLETED message is displayed, turn the Hi-Scan Pro off.
7.
Turn the ignition key off for 20 seconds and start the engine to check for proper operation.
8.
Check for any engine or transmission section diagnostic trouble codes (DTCs) using the Hi-Scan Pro with the system software card and erase any
DTC present.
Note:
Refer to the TCM Reprogramming Troubleshooting section if the reprogram download does not work properly.
If the automatic update procedure fails to download the new program, follow the Manual Reprogramming Procedure.
