Sportage 4WD L4-2.0L (2005)
Blower Motor Relay: Testing and Inspection
INSPECTION
Check for continuity between the terminals.
1. There should be continuity between the No.3 and No.4 terminals when power and ground are connected to the No.1 and No.2 terminals.
2. There should be no continuity between the No.3 and No.4 terminals when power is disconnected.
3. If the blower relay does not operate properly, substitute with a known-good blower relay and check for proper operation.
4. If the problem is corrected, replace the blower relay.
