Sportage 4WD L4-2.0L (2005)
Shifter A/T: Testing and Inspection
SHIFT LEVER
INSPECTION
1. Adjusting method for T/M control cable
1. Set room side lever and T/M side lever to "N" position.
2. Connect gear selector lever and shift cable.
3. Connect T/M side lever to cable in a following orders.
a. Push cable lightly to "F" direction shown to eliminate FREE PLAY of cable.
b. Tighten adjusting nut.
4. After adjustment, ensure that the transaxle gear selector lever operates properly by moving the lever to each gear position.
2. Shift lock
1. With shift lever at "P" position and brake pedal not depressed. Push button cannot be operated.
2. With IG key at the position other than "LOCK" (may be at "ACC") and brake pedal stroke 15 - 25 mm (0.59 - 0.98 inch) (with shift lever at
"P" position). Push button can be operated and shift lever can be shifted smoothly to out of"P" range.
3. With brake pedal not depressed. Shift lever can be shifted smoothly to "P" position from other positions.
4. Brake pedal should operate smoothly without catching at all positions.
ADJUSTING PROCEDURE FOR "P" SHIFT LOCK CABLE
