Sportage 4WD L4-2.0L SOHC (1995)
6. Install the blower/evaporator unit. Refer to Blower/Evaporator Unit.
7. Install the cover plate in place.
8. Insert four nuts to retain the cover plate in place.
Tighten the four nuts to 80 lb-in (9 N.m).
9. Reconnect the five connectors
10. Reinstall carpet.
11. Replace the dash panel.
12. Connect the pressure hose to the evaporator core tube connection.
13. Connect the suction hose to the evaporator core tube connection.
14. Connect the heater return hose to the heater core outlet tube connection.
15. Connect the heater inlet hose to the heater core inlet tube connection.
16. Install the battery.
17. Install the battery bracket.
18. Connect the battery cables.
19. Replace the engine coolant. Engine Cooling System.
20. Charge the A/C system with refrigerant. Refer to Recovery/Evacuating/Charging.
