Sportage 4WD L4-2.0L SOHC (1995)
Headlamp Switch: Service and Repair
NOTE: On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
1. Position front wheels straight ahead.
2. Disconnect battery ground cable.
3. Remove steering wheel.
4. Remove lower and upper steering column panels.
5. Remove cancel cam.
6. Disconnect four combination switch electrical connectors.
Fig. 6 Combination Switch Replacement
7. Loosen combination switch mounting bolt, Fig. 6.
8. Depress tab and slide combination switch off of steering shaft.
9. Reverse procedure to install.
10. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
