Sportage 4WD L4-2.0L SOHC (1995)
Air Filter Element: Service and Repair
REMOVAL
1. Loosen air intake hose clamp at the air flow meter.
2. Disconnect air hose from air flow meter.
3. Remove six screws retaining air cleaner housing and lift housing unit.
4. Remove air cleaner from beneath air cleaner housing.
CAUTION: Do not use compressed air to clean the air cleaner element.
5. Inspect air cleaner element for excessive dirt, damage, or oil.
6. Replace the cleaner element if necessary.
INSTALLATION
1. Lift the air cleaner housing unit and install the air cleaner beneath the housing unit.
2. Lower the housing unit and replace six retaining screws to hold the unit in place.
3. Reattach air intake hose to the air flow meter and tighten the retaining clamp.
