Sportage 4WD L4-2.0L SOHC (1995)
Fuel Pressure Regulator: Service and Repair
WARNING:
-
The fuel system remains under pressure when the engine is not running. Perform the Fuel Pressure Release procedure before
disconnecting any fuel line to reduce the chance of personal injury or fire damage to the vehicle components.
-
Fuel is explosive. When working on fuel system parts, make sure to supply adequate ventilation to the work area. Do not smoke and keep
sparks and open flames away.
REMOVAL
1. Perform Fuel Pressure Release Procedure.
2. Disconnect the vacuum hose.
3. Disconnect the fuel return hose.
4. Remove the pressure regulator by removing the two mounting bolts.
INSTALLATION
1. Install a new 0-ring on the regulator body.
2. Install the pressure regulator with two mounting bolts.
Tighten to 69 - 104 lb in (7.8 - 11.7 Nm).
3. Install the fuel return hose.
4. Install the vacuum hose.
5. Connect the fuel pump electrical connector.
