Sportage 4WD L4-2.0L SOHC (1995)
3.
Remove the six (6) hub body bolts and lockwashers then tap the Auto Locking Hub body with a rubber hammer and remove the hub.
Notice:
The six (6) hub body bolts and lockwashers will be used for Manual Locking Hub installation.
4.
Using snap ring pliers, remove the axle shaft snap ring and spacer from the axle shaft.
Notice:
The axle shaft snap ring and spacer will be used for Manual Locking Hub installation.
5.
Using a pair of needle nose pliers, remove the fixed cam assembly.
6.
Using the Adjustable Adapter Wrench (SST K95B-0001-U), remove the Wheel Bearing Pre-Load Adjusting Nut.
