Sportage 4WD V6-2.7L (2009)
Rear Door Panel: Service and Repair
Rear Door Trim
REPLACEMENT
REMOVE REAR DOOR TRIM
CAUTION:
-
Take care not to scratch the door trim and other parts.
-
Put on gloves to protect your hands.
1. Remove the inside handle cover (A).
2. loosen the door trim (A) mounting screws. Release the clips that hold the door trim, then remove the door trim by pulling it upward. Disconnect
the power window switch connector.
3. Remove the door trim seal.
4. Installation is the reverse of removal.
NOTE:
-
Roll the glass and down to see if it moves freely without binding.
-
Make sure the door locks and opens properly.
