Sportage 4WD V6-2.7L (2009)
Open the hood and check for 5C084 campaign completion label above the passenger side strut tower If label exists NO FURTHER ACTION IS
REQUIRED
If label does not exist continue to step one (1) of Service Procedure outlined below
Service Procedure: Spraying Cavity Wax onto the inside of Rear Floor Side Members
1. Raise vehicle on lift and remove the rear wheel(s) from the vehicle; then remove fastener (A) that retains the wheel guard to the rear floor side
member.
Remove the ABS wheel speed sensor harness clip mounting bolt (B)