Sportage 4WD V6-2.7L (2009)
5. 2.0L Engine, remove the large bolt going through the rear
mount.
6. 2.7L Engine, loosen the clamp holding the intake tube to the Air Filter Box. Disconnect the harness from the Air Flow Meter.
Remove the bolts and lift out the Air Filter Box.
Next remove the 3 bolts holding the mount to the transaxle.
7. 2.7L Engine, remove the 2 bolts and 2 nuts holding the mount bracket between the engine and mount.
You may need to place a floor jack under the front of the engine before removing the bolts.
Carefully lower the floor jack.
