Sportage 4WD V6-2.7L (2009)
Intake Manifold: Service and Repair
Repair Procedures
REMOVAL
INTAKE MANIFOLD
1. Remove the engine cover.
2. Remove air cleaner hose.
3. Remove surge tank assembly.
(1) Disconnect the accelerator cable.
(2) Disconnect the TPS connector(A).
(3) Disconnect the ISA connector(B).
(4) Disconnect the VIS actuator connector(C).
(5) Disconnect the injector connector(D).
(6) Disconnect the PCSV connector(E).
(7) Disconnect the PCSV hose.
(8) Disconnect the brake booster vacuum hose(A).
(9) Disconnect the PCV hose.
(10) Disconnect the IAT sensor connector(A).
(11) Disconnect the VIS actuator connector(B).
(12) Disconnect the ground cable(A) from the surge tank assembly.
