Sportage 4WD V6-2.7L (2009)
Air Door Actuator / Motor: Testing and Inspection
Mode Control Actuator
INSPECTION
1. Ignition "OFF"
2. Disconnect the connector of mode control actuator.
3. Verify that the mode control actuator operates to the vent position when connecting 12V to the terminal 1 and grounding terminal 2.
4. Verify that the mode control actuator operates to the defrost position when the connections are reversed.
5. Check the voltage between terminals 4 and 5.
It will feed back current position of actuator to controls.
6. If the measured voltage is not within specification, substitute with a known-good mode control actuator and check for proper operation.
7. If the problem is corrected, replace the mode control actuator.