kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Control Assembly, HVAC|Service and Repair > < Initial Inspection and Diagnostic Overview|Page 3991
Page 2
background image

4. If a fault code is displayed during the DTC check, Inspect a malfunction cause by referring to the DTC code.
5. Fail safe

(1) In-car temperature sensor: Control with the value of 23°C(73.4°F)
(2) Ambient temperature sensor: Control with the value of 20°C(67°F)
(3) Evaporator temperature sensor: Control with the value of -2°C(28.4°F)
(4) Humidity sensor: Control with the value of 10%
(5) Photo sensor: None
(6) Temperature control actuator (Air mix potentiometer):

If temperature setting 17°C-24.5°C, fix at maximum cooling position.
If temperature setting 25°C-32°C, fix at maximum heating position.

(7) Mode control actuator (Direction potentiometer):

Fix vent position, while selecting vent mode.
Fix defrost position, while selecting all except vent mode.

Control Assembly, HVAC|Service and Repair > < Initial Inspection and Diagnostic Overview|Page 3991