Sportage 4WD V6-2.7L (2009)
Body Control Module: Testing and Inspection
INSPECTION
Verify each components operation using related timing charts.
1. TAIL LAMP AUTO CUT
(1) With the tail lamp switched ON, if the ignition.
Is switched OFF and the driver's door opened, the tail lamp should be automatically turned OFF.
(2) With the ignition switch ON, if the driver's door is opened and the ignition is switched to OFF, the tail lamp should be automatically turned
OFF.
(3) When the tail lamp is cut automatically and the tail lamp switch is turned OFF and ON, the tail lamp illuminates and auto cut function is
cancelled.
(4) When the tail lamp is cut automatically and the ignition key is inserted, the tail lamp illuminates and auto cut function is canceled.
(5) In case of battery disconnection-connection in auto cut mode, preserve auto cut mode.
2. IGNITION KEYHOLE ILLUMINATION
(1) Ignition keyhole illumination is turned ON when the driver or passenger door is opened.
(2) The "ON" state for ignition keyhole illumination is delayed 10 seconds when the door is closed as in step 1).
(3) Ignition keyhole illumination is turned off if the ignition switch is turned ON as in Step 1) & 2).
(4) Ignition keyhole illumination is turned off if ARM state is entered. See steps 1) & 2).
T1 : 10 ± 1 sec,
T2 : 0 - 10 sec.
3. DELAYED ROOM LAMP
(1) When the first door (driver, or assist or 4doors) is opened, Room lamp is turned on.
(2) When the door is closed, the room lamp is fade out for 2 seconds after there is on for 30 seconds.
(3) Regardless of IG ON/OFF in door open state, room lamp output is ON.
(4) When remote control UNLOCK is received, room lamp is turned on for 30 seconds.
(5) While room lamp is on due to Remote control unlock, if another Remote control unlock is received, then room lamp is again on for 30 sec.
(6) During on for 30 seconds, when Remote control LOCK receive (ARM condition) or IG2 is ON,put out lights after sensitize for 2 seconds.
(7) During ON for 30 seconds, when produce all doors LOCK in driver/Assist/4door close state (But, hood & tail gate door exception), put out
lights after sensitize for 2 seconds.
(8) 30 seconds delay function is suspended when it is door open during 30 seconds delay action regard to remote control UNLOCK.(Function
achievement by sensitization room lamp)
T1 : 5.5 ±1 sec.,