kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 143 > < Diagram Information and Instructions|Page 141
Page 6
background image

16. 2-TURN UNLOCK

(1) When driver / assist key unlock signal is received, only driver door/assist door unlock pulse are issued, if remote control unlock signal is

received, only driver door pulse is issued.

(2) After 2) clauses action, when re-input by driver or assist key unlock or remote control unlock signal within T2 all door unlock pulse is issued.
(3) When unlock signal re-inputs after T2 after 2) clauses action, do only driver door unlock pulse are issued.(When door is inputted unlock signal

in unlock state, no again unlock pulse is issued.

(4) When remote control signal is again received in driver unlock & hazard pulse is issuing by remote control unlock, all door unlock pulse issued

and hazard pulse is issued 2 th.

(5) When input again remote unlock signal in 4 sec after driver unlock output & hazard output by unlock, all door unlock & hazard pulse is issued

2 th.

T1 : 0.5±0.1S
T2 : Less than 4 sec
T3 : More than 4 sec

17. HORN ANSWER BACK

(1) In the lock (arm state) state by transmitter lock, when received again transmitter lock signal within 4 sec after receive finally transmitter lock

signal, horn pulse (30ms) is issued.

T1 : 0.5 ± 0.1 sec
T2 : 1.0 ± 0.1 sec
T3 : 30ms sec ± 5 ms
T4 : Less than 4 sec
T5 : More than 4 sec

Diagram Information and Instructions|Page 143 > < Diagram Information and Instructions|Page 141