kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Windshield Deicer Relay|Page 253 > < Heated Glass Element Relay|Photo|Page 250
Page 1
background image

Heated Glass Element Relay: Testing and Inspection
Windshield Deicer Relay

INSPECTION

1. Remove the negative (-) battery terminal.
2. Remove the windshield deicer relay (A) from the engine room relay box.
3. Check for continuity between the terminals.
4. There should be continuity between the No.87 and No.30 terminals when power and ground are connected to the No.86 and No.85 terminals.
5. There should be no continuity between the No.87 and No.30 terminals when power is disconnected.

INSPECTION

1. Once ALT "L" is ON, if the defogger is switched ON, the defogger will stay ON for 20 minutes duration.
2. If defogger switch is pressed again (see Step 1), or if ignition is switched OFF, the defogger will shut OFF.

T1 : 0.06 ± 0.01 sec.,
T2 : 20 ± 1 min.

Windshield Deicer Relay|Page 253 > < Heated Glass Element Relay|Photo|Page 250