Sportage 4WD V6-2.7L (2009)
Side Air Bag: Service and Repair
Curtain Airbag (CAB) Module
Components and Components Location
COMPONENTS
Repair Procedures
REMOVAL
1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2. Remove the following parts .
A. Front and rear seat
B. Interior trim
C. Trunk trim
D. Headlining
3. Disconnect the connector (A).
4. After loosening the mounting bolts, remove the curtain airbag (B).
NOTE:
After installing the curtain airbag, confirm proper system operation: Turn the ignition switch ON; the SRS indicator light should be turned on for
about seconds and then go off.