Sportage 4WD V6-2.7L (2009)
Fuel Gauge Sender: Testing and Inspection
INSPECTION
FUEL SENDER
1. Using an ohmmeter, measure the resistance between terminals 5 and 6 at each float level.
2. Also check that the resistance changes smoothly when the float is moved from "E" to "F".
3. If the height resistance is unsatisfied, replace the fuel sender as an assembly.
CAUTION:
After completing this test, wipe the sender dry and reinstall it in the fuel tank.
SUCTION FUEL GAUGE SENDER
1. Using an ohmmeter, measure the resistance between terminals 1 and 2 of SUB sender connector (A) at each float level.
2. Also check that the resistance changes smoothly when the float is moved from "E" to "F".
3. If the height resistance is unsatisfied, replace the fuel sender as an assembly.
