Sportage 4WD V6-2.7L (2009)
Alignment: Specifications
WHEEL ALIGNMENT
TOE
Standard value Toe-in (B-A) mm (in) ............................................................................................................................................... 0 ± 2 mm (0 ± 0.079 in)
Tie rod end lock nuts(A) tightening torque............................................................................................................50 - 60 Nm (5 - 6 Kgf-m, 36.9 - 44.3 lb-ft)
Standard value Toe-in (B-A) mm (in).................................................................................................................................................0 ± 2 mm (0 ± 0.079 in)
CAMBER
Camber........................................................................................................................................................................................................................0 ° ± 30'
CASTER
Caster.....................................................................................................................................................................................................................3 ° 36' ± 30'
The difference of left and right wheels about the camber and the caster must be within the range of 0 ° ± 30'.
TOE-IN
Standard value.....................................................................................................................................................................................................4.6 =3/-1 mm
Left tie rod : Clockwise direction -> toe-in
Right tie rod : Clockwise direction -> toe-out
The variation of toe by a rotation of the tie rod..................................................................................................................................About 15.2 mm (1 ° 16')
Standard value.....................................................................................................................................................................................................4.6 =3/-1 mm
-
Each toe should be within 2.8 mm (0.11 ± 0.039 in).
If the difference between right and left is not within + 2 mm (0.079 in), repeat adjustment.
-
After adjusting the tie rod(C), tighten both nuts(B) to the specified torque.
Specified torque............................................................................................................................................................50 - 60 Nm (5 - 6 kgf-m, 37 - 43 lb-ft)
Standard value.....................................................................................................................................................................................................4.6 =3/-1 mm
Left tie rod : Clockwise direction -> toe-in
Right tie rod : Clockwise direction -> toe-out
The variation of toe by a rotation of the tie rod..................................................................................................................................About 15.2 mm (1 ° 16')
CAMBER
Standard value.....................................................................................................................................................................................................-0 ° 55' ± 30'
Difference between right and left angle is within 0 ° 30'