Sportage 4WD V6-2.7L (2009)
Alignment: Service and Repair
DESCRIPTION
WHEEL ALIGNMENT
TOE
Standard value
Toe-in (B-A) mm (in) : 0±2 mm (0±0.079 in)
NOTE:
-
Toe-in adjustment should be made by turning the right and left tie rods at the same amount.
-
When adjusting toe-in, loosen the outer bellows clip to prevent twisting the bellows.
-
After the adjustment, tighten the tie rod end lock nuts firmly and reinstall the bellows clip.
Tie rod end lock nuts(A) tightening torque :
50 - 60 Nm (5 - 6 Kgf-m, 36.9 - 44.3 lb-ft)
CAMBER
When the wheel tilts out at the top, then the camber is positive (+).
When the wheel tilts in at the top, then the camber is negative (-).