Sportage 4WD V6-2.7L (2009)
5. After supporting the rear cross member assembly(B) with a jack(A), remove the cross member mounting bolts and nuts(C).
6. Remove the propeller shaft.
7. Remove the rear differential(A) from the cross member(B).
8. Remove the suspension arm bracket mounting bolts(A).
9. Remove the suspension arm(B).
10. Install the suspension arm bracket mounting bolts(A).
Tightening torque :
140 - 160 Nm (14 - 16 Kgf-m, 103.3 - 118.0 lb-ft)
11. Install the rear differential(A) on the cross member(B).
Tightening torque :
90 - 120 Nm (9 - 12 Kgf-m, 59.0 - 88.5 lb-ft)
