Sportage 4WD V6-2.7L (2009)
6. Remove the turning on assembly(B) from the driveshaft(A) using the special tool(09495-33000).
7. Clean the turning on assembly.
8. Remove the boot(A) of the transaxle side joint(UTJ).
CAUTION:
For reusing the boot(A), wrap tape(B) around the driveshaft splines(C) to protect the boot(A).
9. Using a plier or flat-tipped (-) screwdriver, remove the both side of clamp(B) of the dynamic damper(A).
10. Fix the driveshaft(A) with a vise(B) as illustrated.
11. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is
removed.
12. Separate the dynamic damper(A) from the shaft(B) carefully.