Sportage 4WD 2Dr L4-2.0L (2002)
Front Door Window Regulator: Service and Repair
Power Window Regulator
Removal
CAUTION: When a removing or installing any electrical units, wiring or electrical connectors, disconnect the negative battery cable to prevent
possible short circuits which could lead to personal injury and/or property damage.
1. Disconnect negative battery cable.
2. Remove power window operating switch from the door armrest.
Power Window Operating Switch
a. Remove the screw cap and the screw at the bottom of the door armrest pocket.
b. Remove the power window operating switch through the access hole of door armrest pocket and disconnect the power window harness
connectors.
3. Remove the door trim.
4. Remove two nuts on the pull handle bracket.
5. Remove the pull handle bracket.
6. Remove the speaker.
