Sportage 4WD 2Dr L4-2.0L (2002)
Brake Pedal Assy: Testing and Inspection
Brake Pedal Height
PEDAL HEIGHT
Inspection
1. Check that the distance from the top center of the pedal pad to the dash panel is within specification.
Pedal height: 8.90 - 9.10 inch (226 - 231 mm)
Adjustment
1. Disconnect the stop light switch connector.
2. Loosen lock nut "B", and turn switch "A", until it does not contact the pedal.
3. Loosen lock nut "D", and turn rod "C" to adjust the height.
4. Adjust the pedal free play and then tighten operating rod lock nut.
Tighten lock nut to 21 ft. lbs. (29 Nm).
5. Turn the stop light switch until it contacts the pedal and then turn an additional 1/2 turn. Then tighten lock nut.
Tighten lock nut to 11.5 ft. lbs. (15.7 Nm).
6. Check that the stop lights come on when the brake pedal is depressed, and go off when the brake pedal is released.
