Sportage 4WD 2Dr L4-2.0L (2002)
7. Apply 500 mmHg vacuum with a vacuum pump.
8. Put the master cylinder gauge (SST K95U-5200-B) onto the vacuum booster unit with the top of the adjusting bolt touching the push rod.
9. Check the clearance between the edge of the adjusting bolt and the push rod of the power brake unit.
Permissible clearance: 0.004 - 0.012 inch (0.1 - 0.3 mm)
If not to specification, loosen the lock nut of the push rod, and turn the push rod to make the adjustment.
10. Install master cylinder and bracket assembly.
