Sportage 4WD 2Dr L4-2.0L (2002)
3.
Remove four (4) bolts from radiator shroud.
4.
Remove the four (4) nuts from the cooling fan assembly to pulley mount.
a)
With the radiator shroud loose, remove the cooling fan assembly. Be careful not to damage the radiator fins.
5.
On the work bench: remove the four (4) bolts that secure the cooling fan to the clutch.
a)
Discard old fan blade.
b)
Transfer the clutch to the new replacement cooling fan.
c)
Torque the bolts to 78~104 inch lbs. (8.8~11.7 Nm).
*NOTICE
Cooling fan clutch must be transferred to the replacement cooling fan blade, note offset during replacement. The fan clutch should be mounted to the
recessed side of the fan blade.
