Sportage 4WD 2Dr L4-2.0L (2002)
Engine - Coolant Temperature Sensor/Switch: Service and Repair
Removal
The engine coolant temperature sensor is near the thermostat.
1. Disconnect the engine coolant temperature sensor connector.
2. Remove the engine coolant temperature sensor.
Installation
1. Install a new washer and the engine coolant temperature sensor onto the engine.
Tighten to 18 - 22 ft-lb (25 - 29 N.m).
2. Connect the engine coolant temperature sensor connector.
3. Start the engine and check for coolant leakage.
