Sportage 4WD 2Dr L4-2.0L (2002)
Clutch Fluid: Service and Repair
Clutch Hydraulic System Bleeding
BLEEDING
The brake fluid reservoir must be more than 3/4 full during bleeding.
All air must be bled out of the hydraulic system for correct clutch operation.
1. Remove bleeder cap.
2. Attach a suitable hose to the bleeder screw and direct end of hose into see-through container.
3. Hold the clutch pedal down, open the slave cylinder bleeder screw to let any air escape. Close bleeder screw and let the pedal up.
4. Repeat step 1 until only fluid comes out of the bleeder screw.
5. Replace bleeder cap and discard used brake fluid in container.