Sportage 4WD 2Dr L4-2.0L (2002)
Coolant: Testing and Inspection
Inspection
1. Make sure that the engine is cold.
Caution: Never remove the radiator cap when the engine is hot.
2. Remove the radiator cap and verify that the coolant level is near the radiator filler neck.
3. If the coolant level is below the radiator filler neck, add enough coolant to bring the level up to the filler neck.
4. Install the radiator cap. Make sure it is seated firmly.
5. Verify that the coolant level is near the F line on the coolant fluid reservoir (engine at operating temperature).
6. If the coolant level is below the F line, then remove the coolant fluid reservoir cap and add enough coolant to bring the level up to the F line.
7. Re-install the coolant fluid reservoir cap.
