Sportage 4WD 2Dr L4-2.0L (2002)
4. Install the bulkhead connector mounting bolts and tighten.
Tighten bolts to 18 lb-ft (24 N.m).
5. Install and tighten the small mounting nut.
6. Evacuate the A/C system.
Refer to Recovery/Evacuating/Charging.See: Heating and Air Conditioning/Service and Repair
Perform vacuum test.
7. Charge the A/C system.
Refer to Recovery/Evacuating/Charging.See: Heating and Air Conditioning/Service and Repair
Perform vacuum/leak test.
8. Install battery and reconnect battery cables (negative cable last).
9. Start engine and run the A/C system. Check for leaks at the line connections
10. Remove wheel chocks.
