Sportage 4WD 2Dr L4-2.0L (2002)
1. Align the timing belt pulley and the pump body alignment marks.
2. Align the mating marks on the camshaft pulleys with the alignment marks on the seal plate.
Notice:
^
For intake side camshaft pulley, align I mark.
^
For exhaust side camshaft pulley, align E mark.
3. Install the timing belt so that there is no looseness at the tension side, and at the two camshaft pulleys.
Caution:
^
If the timing belt is being reused, it must be reinstalled to rotate in the original direction.
^
Check that there is no oil, grease, or dirt on the timing belt.
4. Loosen the teinsioner lock bolt.
5. Turn the crankshaft two complete revolutions in the direction of rotation.
