Sportage 4WD 2Dr L4-2.0L (2002)
Vehicle Lifting: Service and Repair
GENERAL VEHICLE LIFTING AND JACKING
WARNING:
-
DO NOT GET UNDER THE VEHICLE WHEN IT IS SUPPORTED BY THE JACK ONLY. ALWAYS USE SAFETY STANDS TO
SUPPORT THE VEHICLE WEIGHT, AND WHEEL CHOCKS TO KEEP THE VEHICLE FROM ROLLING. FAILURE TO DO SO
COULD RESULT IN INJURY OR DEATH.
-
BEFORE LIFTING THE VEHICLE WITH A HOIST, MAKE SURE THAT THE FRONT AND REAR OF THE VEHICLE ARE
PROPERLY POSITIONED AND THE HOIST ARMS SET AS WIDE AS POSSIBLE.
VEHICLE JACKING
When vehicle is jacked with a vehicle jack or floor jack (workshop jack), appropriate safety procedures should be followed.
Front End Jack position
When vehicle is jacked from front crossmember only, safety stands should be placed at the second crossmember on both sides of the body frame.
Rear End Jack Position
When vehicle is jacked from the center of rear crossmember, safety stands should be placed at the forward spring hanger of the rear spring on both sides
of the body frame.
Left Hand Front Wheel Jack Position
When vehicle is jacked from LEFT HAND FRONT WHEEL, wheel chocks should be placed on both sides of the RIGHT HAND REAR WHEEL
Right Hand Front Wheel Jack Position
When vehicle is jacked from RIGHT HAND FRONT WHEEL, wheel chocks should be placed on both sides of the LEFT HAND REAR WHEEL
Left Hand Rear Wheel Jack Position
