Sportage 4WD 2Dr L4-2.0L (2002)
Liquid Vapor Separator: Testing and Inspection
Vapor Separator
Inspection
1. Raise and suitably support the vehicle.
2. Remove the right rear tire.
3. Remove the retaining bracket from the vapor separator.
4. Remove the vapor separator.
5. Visually check the vapor separator for damage. Replace if necessary.
6. Reinstall the vapor separator.
7. Replace the retaining bracket to secure the vapor separator in place.
8. Reinstall the right rear tire on the vehicle.
9. Lower vehicle to the ground.