Sportage 4WD 2Dr L4-2.0L (2002)
1. Connect the hoses of the vapor separator assembly.
2. Install the hose retaining clamps on the hoses of the separator assembly as they are connected to the fuel tank.
3. Attach the bolt which holds the separator assembly to the inlet pipe assembly.
4. Install a nut to the attaching bracket for the neck portion of the inlet pipe assembly.
5. Install three screws to the neck portion of the inlet pipe assembly.
6. Install the filler cap to the threaded portion of the inlet pipe assembly.
7. Close the fuel inlet filler door by pushing it until the catch is secure.
